1000L - 200000L Stainless Steel Fermentation Tank Conical Glycol Beer Fermentor Vessel

1. A serials of the fermentation tank models:

2. 5000L Fermentation System

NDL Craft offers a wide array of fermenters(fermentation) tanks that are designed accordingly to our customers’ specifications and their needs. Our fermenters come in three different generalized builds (customizable tanks are also available): single wall, un-jacketed and jacketed. All of our tanks can be pressurized (unless otherwise requested).

NDL Craft professional 5000L Fermentation Tanks are made from stainless steel as it is easy to clean and can be reused almost indefinitely. They all have a valve at the very bottom of the cone which can be used to remove sediment, and also drain the finished beer for bottling or kegging when done. Most also have a second port higher on the cone which can be used to draw samples of beer for measurement or tasting.

1)Model: 5000L
2)The main material is the SUS304 stainless steel
3)Top is stainless steel dished head, bottom is 60° conical design, easy to discharge yeast
4)Working pressure of 0.15Mpa, test pressure 0.3Mpa
5)4 stainless steel leg, height and level can be adjusted
6)Inner jacket thickness 4mm, insulation PU thickness 100mm, outer jacket thickness 3mm
7)Pilished to 0.4μm, easy cleaning the inner surface
8)Sanitary clamp type connector
9)Vacuum valve / pressure relief valve / pressure gauge / thermometer / sampling valves / lifting lugs / side of top manhole / 360° CIP ball
10)Dall wallwith a dimple jacket in the middle,dimple jacket for cooling and heating
11)Racking arm for beer outlet
12)Standard clamp-type hops adding port
13)Electronic thermometer sensor connector